Nortel BCM200 Configuration Manual

Manufacturer
Type
Pages 36 Pages
Updated Sep 3, 2021
Category Telephone System

Table of Contents

  • Configuration guide

    1
  • Introduction

    4
  • Trouble Reporting

    5
  • Special Notes

    7
  • Overview

    8
  • Configuration Guide

    10
  • Figure 3: Software Management Menu

    11
  • VOIP Gateway Trunks

    12
  • Figure 5: Available VOIP Gateway Trunks

    13
  • Figure 6: Assigning DN numbers to Line Pool

    14
  • Figure 7: Configuring Global DN length

    15
  • Figure 9: Configuring Private Received Number Length

    16
  • Figure 10: Defining Route for VOIP Trunks

    17
  • Figure 11: Assign Destination Code to Route Numbers

    18
  • H.323 Gateway Parameters

    19
  • Media Parameters

    20
  • Figure 13: Media Parameters

    21
  • Port Ranges

    22
  • Configuring Outgoing Calls from BCM to AT&T IP Flex Reach

    23
  • Configuring Incoming Calls from AT&T IP Flex Reach to BCM

    24
  • Configuring IP Phone LCD Screen to Display DID Number

    25
  • Troubleshooting

    26
  • Figure 20: IP Device Listing

    27
  • Figure 22: Line Monitor Information

    28
  • Real-time BCM System Status LED Displays

    29
  • Real-time BCM Fault/Alarms Management

    30
  • BCM Service Management System

    31
  • BCM Log Management

    33
  • Figure 27: Log Management Screen

    34
  • APPENDIX A: Configuring Destination Code with Wildcard

    36

Related Manuals

Below are links to the text of a wide variety of documents related to the Nortel BCM200 Configuration Manual.