HP L10 User Manual

Manufacturer
Type
Pages 134 Pages
Updated Sep 3, 2021
Category Switch

Table of Contents

  • Safety instructions

    4
  • Product Description

    13
  • Overview

    14
  • Features

    15
  • Front Panel, Model S10 Short-Wave Hub

    16
  • Front Panel, Model L10 Long-Wave Hub

    17
  • Rear Panel, Short-Wave and Long-Wave Hubs

    18
  • Supported Topologies

    19
  • Cascaded Short-Wave Hub Topology

    20
  • Cascaded Long-Wave Hub Topology

    21
  • Installation

    23
  • Procedure 1: Prepare to Install the Hub

    25
  • Procedure 2: Unpack the Hub

    26
  • Procedure 3: Verify Hub Operation

    27
  • Procedure 4: Mount the Hub into a Rack (Optional)

    29
  • Installing Rails

    30
  • Installing the Hub into the Rack

    31
  • Installing the Plenum Shroud

    32
  • Hub Correctly Installed in a Rack

    33
  • Procedure 5: Plan the FC-AL Connections

    34
  • Correct Cabling Example for a Long-Wave Hub

    35
  • Cascaded Long-Wave Hub Configuration

    36
  • Incorrect Cabling Examples

    37
  • Incorrect Cabling Example: More Than One Cable Connection Between Hubs

    38
  • Nonsupported Cabling Example

    39
  • Procedure 6: Connect FC-AL Devices

    40
  • Procedure 7: Verify the Connections

    42
  • RS-232 Interface Functions

    43
  • Worksheet for Hub Configuration

    44
  • About the RS-232 Main Menu

    45
  • Tips for Using the RS-232 Interface

    46
  • Setting Up an RS-232 Connection

    47
  • Setting Up a Connection to a Dumb Terminal

    48
  • Updating the Hub Firmware

    50
  • Procedure 1: Obtain the Current Firmware

    51
  • Procedure 3: Update the Hub Controller Firmware

    52
  • Procedure 4: Update the Hub Device Agent Code

    54
  • Procedure 5: Reset the Hub

    55
  • Procedure 6: Set Manufacturing Values

    56
  • Enabling Hub Management

    59
  • Verifying and Setting SNMP Values

    60
  • Configuring Cascaded Hubs

    62
  • Running Diagnostic Tests

    66
  • Viewing Hub Information

    67
  • Troubleshooting

    69
  • Troubleshooting Procedures

    70
  • LED Indicators

    72
  • If the Hub Fault LED Stays on After Self-Test

    75
  • If a Fan Is Not Operating

    76
  • Not Displayed in SCSI Adapters Window

    77
  • If the Management Server Cannot Ping the Hub

    80
  • If Firmware Upgrade Appears to Fail

    81
  • Recovering from Failed Firmware Upgrade

    82
  • Maintenance and Replacement

    87
  • Introduction

    88
  • Maintenance

    89
  • Replacing the Fan Module

    90
  • Removing the Fan Module

    91
  • Reference

    93
  • Standard Configurations

    94
  • HP SureStore E Hub, Standalone

    95
  • HP SureStore E Hub, Factory-Racked

    96
  • Configuration Options

    97
  • Model S10 or L10 Option 001 Hub Rackmount Kit

    98
  • Replacement Parts

    99
  • HP SureStore E Hub Replaceable Parts and Service Part Numbers

    100
  • Power Cord Part Numbers

    101
  • Operating Requirements

    102
  • Cable Plant Specifications: Single-Mode (2 km–10 km, 100 MB/sec)

    103
  • Non-OFC Operation

    104
  • Supported Hardware

    105
  • Supported Distances

    106
  • Environmental Specifications

    109
  • Physical Characteristics of Standalone Hub

    110
  • Reference Documents

    111
  • Regulatory Statements

    112
  • Laser Safety

    115
  • Glossary

    119
  • Index

    123

Related Manuals

Below are links to the text of a wide variety of documents related to the HP L10 User Manual.