MIMAKI JV3-75SPII Operation Manual

Manufacturer
Type
Pages 150 Pages
Updated Sep 3, 2021
Category Printer

Table of Contents

  • For safe operation

    14
  • Cautions and notes

    17
  • Position of the warning label

    18
  • Moving the device

    20
  • Configuration and function

    22
  • The REAR

    23
  • Operation Panel

    24
  • Heater panel

    25
  • Carriage

    26
  • Capping station

    27
  • Media sensor

    28
  • Precautions in handling the ink cartridge

    29
  • Precautions in handling the media

    30
  • Types of media that can be used

    31
  • Setting the heater voltage

    32
  • MENU mode

    33
  • Operation

    36
  • Switching on the power supply

    37
  • Front cover /Maintenance cover

    38
  • Relationships between ink station and head row

    39
  • Adjusting the head height

    40
  • Setting the media on the device

    42
  • Setting a roll holder

    43
  • Setting roll media on the device

    45
  • Operating the lock pin (JV3-130SPII)

    50
  • Switching the direction of winding of the media

    51
  • Setting cut sheet media on the device

    52
  • Heater-Temperature control

    54
  • In case of faultiness with Heater

    55
  • Checking and solving nozzle clogging (TEST plotting)

    56
  • Correcting the media feed rate [MEDIA COMP.]

    58
  • Plotting an Image from source data

    60
  • Interrupting the plotting operation

    61
  • Display detailed plotting information

    62
  • Cut off the media by hand [MEDIA CUT]

    63
  • When [NEAR END] or [INK END] appears

    64
  • Turning the power off

    65
  • Routine Maintenance

    68
  • Cleaning the platen

    69
  • Cleaning the wiper and ink caps

    70
  • Cleaning the head sides

    72
  • Use the cleaning kit

    73
  • Cleaning the nozzle [NOZZLE WASH]

    74
  • When the waste ink tank becomes full

    76
  • Basic operations of menus

    78
  • Function mode

    80
  • Setup functions

    81
  • Setting suitable heater temperature

    87
  • Setting exhaust fan and drier fan

    88
  • Effective Plotting Area

    89
  • Establishing An Origin

    90
  • Correcting the media feed rate during operation

    91
  • Maintenance of the device

    94
  • Cleaning the station interior [STATION]-[CARRIAGEout]

    96
  • When the message [REPLACE WIPER] is displayed [STATION]-[WIPER EXCHANGE]

    97
  • Ink discharge way cleaning [STATION]-[Disway WASH]

    99
  • When not in use the plotter over the long term [STATION]-[CUSTODYwash]

    101
  • When media thickness is changed [PRINT ADJUST]

    104
  • Regular wiping function [INT.WIPING]

    106
  • Routine cleaning [ROUTINE CLN]

    108
  • Sleep cleaning [SLEEP clean]

    109
  • If nozzles are clogged even after the cleaning function is executed

    110
  • HEAD WASH]

    111
  • Reduce printing time of narrow image [SCAN WIDTH]

    113
  • Switching the ink from SS to SS2 [SS2< >SSCHG]

    114
  • Drawing setup conditions [LIST]

    115
  • Plotting HEX CODE [DATA DUMP]

    116
  • Wiper Life warning [WIPE LEVEL]

    117
  • When use the 440cc ink cartridges [USE 440cc]

    118
  • Setting time [TIME SET]

    119
  • Displaying device information [INFORMATION]

    120
  • Replace the cutter blade

    121
  • Ink exchanging procedure

    122
  • Using the small amount of remaining ink in the 440cc ink cartridge

    126
  • Using further remaining ink in the ink cartridge

    127
  • Before taking a phenomenon as a sign of failure

    130
  • Paper jamming arises/media is soiled

    131
  • If image quality declines

    132
  • Ink cartridge trouble

    133
  • Troubles for which error messages are given on the LCD

    134
  • Error messages

    137
  • Error message

    138
  • Basic specifications

    140
  • Specification for ink

    142
  • Function Flowchart

    143

Related Manuals

Below are links to the text of a wide variety of documents related to the MIMAKI JV3-75SPII Operation Manual.