SharpEye 20/20L User And Maintenance Manual

SharpEye

Smoke Alarm

🧩  Manuals supported for 2 models of SharpEye

  • 20/20LB
  • 20/20L-LB

Advertisement

Table of Contents
  • Scope

    9
  • Technical Description

    10
  • Detection Levels

    11
  • Detector Structure

    12
  • Figure 1. Flame Detector Assembly - Outline Drawing

    13
  • Figure 2. Flame Detector Assembly - Schematic Section

    14
  • Performance

    15
  • Table 1. Response Sensitivity Ranges

    16
  • Cone Of Vision

    17
  • False Alarms

    18
  • Operation

    19
  • Mode Selection

    20
  • Alarm Delay Switch (SW2)

    22
  • Detector States

    23
  • Built-In-Test (refer to 2.5)

    24
  • Technical Specifications

    26
  • Table 7. Dry Contacts Relays Ratings

    27
  • Mechanical Specifications

    28
  • Environmental Specifications

    29
  • Installation Instructions

    30
  • Preparations For Installation

    31
  • Detector Mounting

    32
  • Figure 4.a. U/IR Detector and Swivel Mount Assembly

    33
  • Figure 4.b. Swivel Mount Assembly

    34
  • Wiring (Refer to Fig. 5)

    35
  • Terminal Wiring (Figures 6,7)

    36
  • Figure 6. Terminal Board Configuration

    38
  • Figure 7. Flame Detector Assembly - Wiring Diagram

    39
  • Selection Of Operating Modes

    40
  • Operating Instructions

    41
  • Functional Testing

    42
  • Safety Precautions

    43
  • Maintenance Instructions

    44
  • Maintenance Records

    45
  • Appendix A - Wire Selection Tables

    47
  • Appendix B. Typical Wiring Configurations

    49
  • Appendix c. mounting the "eexde approved" version

    51
  • Figure 10: Flame Detector Assembly - Wiring Diagram

    53
  • Table 12. Terminals wiring options of the detector

    54
  • Appendix D. Long Range UV/IR Fire Simulator

    55
  • Figure 14: UV/IR Detector Target Point

    56
  • Technical support

    59