REMEHA iSense Pro DIN AD280 Installation And Service Manual

REMEHA

Thermostat


Advertisement

Table of Contents
  • Introduction

    5
  • Installer's liability

    6
  • Safety instructions and recommendations

    7
  • Technical description

    8
  • Description of the display

    9
  • Operating modes

    10
  • Other information

    11
  • Installation

    12
  • Connecting the outside sensor

    13
  • Mounting and connecting the module

    14
  • Boiler GAS 310 ECO

    15
  • Boiler GAS 310 ECO PRO

    17
  • Electrical connections

    19
  • Connecting the BUS cable

    20
  • Connecting a heating circuit and a domestic hot water tank

    21
  • Tank

    22
  • Connecting a direct circuit, a valve circuit and a DHW tank

    23
  • Hot water storage tank connection

    24
  • Pool connection

    26
  • Connecting a mixed tank

    28
  • Connection in cascade

    30
  • Electrical connection diagram

    34
  • Powering up for the first time

    35
  • Installer level

    36
  • Browsing in the menus

    37
  • Reading out measured values

    38
  • Settings after powering up for the first time

    39
  • Naming the circuits and generators

    42
  • Setting the heating curve

    43
  • Changing the settings

    45
  • Defining the configuration mode

    46
  • Professional settings

    47
  • Configuring the network

    54
  • Return to the factory settings

    57
  • Switching off the appliance

    58
  • Troubleshooting

    59
  • Message history

    60
  • Faults

    61
  • Deletion of sensors from the memory in the PCB

    63
  • Failure history

    64
  • Spare parts

    67

Related manuals