Advertisement
Table of Contents
-
Chapter 1: Introduction
19 -
Introduction of the Microlab 600
20 -
Microlab 600 Hardware Setups
21 -
Dual Syringe Diluter Setup
22 -
Continuous Dispenser Setup
23 -
Operating the Microlab 600
24 -
Chapter 2: Hardware Setup
25 -
Overview of Microlab 600 Parts List
26 -
Selecting the Proper Location
28 -
Description of the Rear View of the Drive Units
31 -
Installation of Drive Unit Parts
33 -
Mounting Two Valves with Cross Tube on the Microlab 600
34 -
Installation of Syringe(s)
35 -
Preparing Syringe(s) for Installation
37 -
Installation of the Tubing
39 -
Installing the Tubing
40 -
Installation of the Accessory Holder
43 -
Tubing Management with the Accessory Holder
44 -
Installation of the Hand Probe
45 -
Controller Unit
46 -
Chapter 3: Overview of Screens and Buttons
49 -
Splash Screen
50 -
Run Screens
51 -
Valve Position Indicator Drawings
52 -
Data Entry Screens
54 -
Numeric Keypad
55 -
Chapter 4: Basic Controller Setup and Operation
57 -
User Interface Flow Chart
58 -
Valve Setup
59 -
Software Configuration
60 -
Screen Power Off
61 -
MAC Address (Advanced Controller Only)
62 -
Priming the Instrument
63 -
Quick Start
64 -
Dual Syringe Dispenser
65 -
Error Log
66 -
Chapter 5: Care and Maintenance
67 -
Yearly Maintenance
68 -
Cleaning the Fluid Path
69 -
Cleaning the Exterior of the Microlab 600
70 -
Chapter 6: Troubleshooting
71 -
Error Logs
72 -
Getting Technical Support
74 -
Returning Instruments for Repair
75 -
Technical specifications
77 -
Replacement parts and accessories
79 -
Glossary
95 -
Index
105
Related manuals
Advertisement
