Miller XMT 350 Owner's Manual

Miller
Welding System
📖  Manuals supported for 1 models of Miller
  • XMT 350 FieldPro
Table of Contents
  • SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING

    5
  • Additional Symbols For Installation, Operation, And Maintenance

    7
  • California Proposition 65 Warnings

    8
  • SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION

    9
  • Dangers supplémentaires en relation avec l'installation, le fonctionnement et la maintenance

    11
  • Proposition californienne 65 Avertissements

    12
  • SECTION 3 − DEFINITIONS

    13
  • Miscellaneous Symbols And Definitions

    15
  • SECTION 4 − SPECIFICATIONS

    16
  • Dimensions And Weight

    17
  • Duty Cycle And Overheating

    18
  • Volt-Ampere Curves

    19
  • SECTION 5 − INSTALLATION

    20
  • Selecting Cable Sizes

    21
  • Remote 14 Receptacle Information

    22
  • Optional Gas Valve Operation And Shielding Gas Connection

    23
  • Electrical Service Guide

    24
  • Connecting 1-Phase Input Power

    26
  • Connecting 3-Phase Input Power

    28
  • SECTION 6 − OPERATION

    30
  • Mode Switch Settings

    31
  • SECTION 7 − GTAW OPERATION

    32
  • Typical Connection For ArcReach Stick/TIG Remote (GTAW Process)

    33
  • Lift-Arc TIG Welding Mode - GTAW Lift-Arc - Output On

    34
  • TIG Welding Mode - GTAW - Remote ON/OFF

    35
  • SECTION 8 − GMAW/FCAW OPERATION

    36
  • MIG Welding Mode - GMAW/FCAW Remote ON/OFF

    37
  • Typical Connection For Voltage-Sensing Feeder GMAW/FCAW, FCAW-S Process

    38
  • V-Sense Feeder Welding Modes - GMAW/FCAW, FCAW-S Output ON

    39
  • SECTION 9 − SMAW/CAC-A OPERATION

    40
  • Typical Connection For ArcReach Stick/TIG Remote (SMAW And CAC-A Process)

    41
  • Stick Welding Modes - SMAW EXX18, SMAW EXX10, CAC-A Gouge - Output ON

    42
  • Low Open Circuit Voltage (OCV)

    43
  • SECTION 10 − MAINTENANCE & TROUBLESHOOTING

    44
  • Help Displays

    45
  • Troubleshooting

    46
  • SECTION 11 − ELECTRICAL DIAGRAM

    48
  • SECTION 12 − PARTS LIST

    50
  • SECTION 13 − OPEN SOURCE LICENSE NOTICES

    54

Related manuals